首页 | 本学科首页   官方微博 | 高级检索  
     

ZnO对钙长石/莫来石复合材料性能的影响
引用本文:董伟霞,顾幸勇,包启富.ZnO对钙长石/莫来石复合材料性能的影响[J].电子元件与材料,2009,28(3).
作者姓名:董伟霞  顾幸勇  包启富
作者单位:景德镇陶瓷学院,江西,景德镇,333001
基金项目:江西省教育厅科研项目 
摘    要:以钙长石和莫来石等为主要原料,制备了与硅芯片相匹配的新型复合材料。研究了烧结助剂ZnO的加入量、烧结温度和显微结构等因素对材料性能的影响。结果表明:当w(ZnO)为8%时,该复合材料烧结温度为1000℃,其主要性能如下:在1MHz下εr为6.48,tanδ为4.00×10–3,抗折强度为76.29MPa,αl(25~500℃)为3.44×10–6℃–1。

关 键 词:复合材料  钙长石/莫来石  烧结温度  介电常数

Effect of ZnO on properties of anorthite/mullite composite material
DONG Weixia,GU Xingyong,BAO Qifu.Effect of ZnO on properties of anorthite/mullite composite material[J].Electronic Components & Materials,2009,28(3).
Authors:DONG Weixia  GU Xingyong  BAO Qifu
Affiliation:Jingdezhen Ceramic Institute;Jingdezhen 333001;Jiangxi Province;China
Abstract:The new-type composite with low thermal expansion coefficient and matching with silcon chips was developed. Effects of added mass fraction of ZnO, sintering temperature and microstructure on its properties were also investigated. Results show, its main properties are as follows: when w(ZnO) is 8%, the composites are sintered at 1 000 ℃ for 0.5 h, the εr, tanδ, bending strength, and αl of the composites are 6.48, 4.00×10–3, 76.29 MPa and 3.44×10–6℃–1 (25~500 ℃ ), respectively.
Keywords:composite material  anorthite/mullite  sintering temperature  permittivity  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号