| 轿车骨架注塑模具结构的虚拟设计 |
| |
| 引用本文： | 黄先,董祥忠,莫健华.轿车骨架注塑模具结构的虚拟设计[J].工程塑料应用,2006,34(2):56-59. |
| |
| 作者姓名： | 黄先 董祥忠 莫健华 |
| |
| 作者单位： | 1. 四川大学高分子科学与工程学院,成都,610065
2. 华中科技大学模具技术国家重点实验室,武汉,430074 |
| |
| 基金项目： | 华中科技大学校科研和校改项目;国家重点实验室基金 |
| |
| 摘 要： | 立足于虚拟造型技术,利用CAE软件探讨了轿车骨架注塑模具结构虚拟设计的可行性。结果表明,通过虚拟设计制作的(乙烯/丙烯/二烯)共聚物改性聚丙烯轿车骨架用注塑模具结构设计合理,各部分动作顺畅,特别是浇注系统和冷却系统得到优化,能有效提高生产效率,缩短开发周期,降低生产成本。
|
| 关 键 词： | 轿车骨架 注塑模具 虚拟设计 (乙烯/丙烯/二烯)共聚物 聚丙烯 |
| 收稿时间： | 2005-11-30 |
| 修稿时间： | 2005年11月30 |
VIRTUAL DESIGN OF INJECTION MOLD FOR AUTOMOTIVE FRAMEWORK |
| |
| Huang Xian,Dong Xiangzhong,Mo Jianhua.VIRTUAL DESIGN OF INJECTION MOLD FOR AUTOMOTIVE FRAMEWORK[J].Engineering Plastics Application,2006,34(2):56-59. |
| |
| Authors: | Huang Xian Dong Xiangzhong Mo Jianhua |
| |
| Affiliation: | 1.College of Polymer Science and Engineering, Sichuan University, Chengdu 610065, China;2.State Key Laboratory of Die and Mold Technology, Huazhong University of Science and Technology, Wuhan 430074, China |
| |
| Abstract: | The feasibility of virtual design of injection mold for automotive framework is discussd by using CAE software based on virtual modeling technology.The results show that the structure of injection mold made by virtual technology for PP/EPDM framework is reasonable.Each part of the mold works smoothly,especially the runner system and cooling system are optimized,as a result the production efficiency is improved,the development period is shortened and the production cost is decreased. |
| |
| Keywords: | automotive framework injection molding virtual design ethylene/propylene/diene copolymer polypropylene |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
