CN100汽车发动机油底壳一次拉深成形探索研究 |
| |
引用本文: | 胡建华,覃天,苏广才,黄晓珍.CN100汽车发动机油底壳一次拉深成形探索研究[J].装备制造技术,2012(6):22-24. |
| |
作者姓名: | 胡建华 覃天 苏广才 黄晓珍 |
| |
作者单位: | 1. 柳州五顺汽车配件厂,广西柳州,545005 2. 广西工业职业技术学院机械系,广西南宁,530001 3. 广西大学材料科学与工程学院,广西南宁,530004 4. 上汽通用五菱汽车股份有限公司,广西柳州,545007 |
| |
摘 要: | 采用ETA/Dynaform对工件CN100发动机油底壳进行有限元拉深模拟,为寻求利益最大化,探讨一次性拉深成形的可行性,设计了两种一次性冲压成形的方案进行冲压模拟,任意选取会破裂的节点,跟踪其运动轨迹,并且得到其从冲压开始到冲压结束在X、Y、Z方向上的应力曲线图,通过观测节点所处区域在破裂瞬间的应力图,得知使零件破裂的应力为该节点Z方向的应力,并且根据此给出二次拉延成形的初步方案。
|
关 键 词: | CN100油底壳 一次拉深 数值模拟 |
CN100 Automobile Engine Oil Pan for One-step Drawing Exploration and Research |
| |
Authors: | HU Jian-hua QIN Tian SU Guang-cai HUANG Xiao-zhen |
| |
Affiliation: | 1.Liuzhou Wushun Automobile Fittings Factory,Liuzhou Guangxi 545005,China;2.Department of Mechanical Engineering,Guangxi Vocational and Technical Institute of Industry,Nanning 530001,China; 3.College of Material Science and Engineering,Guangxi University,Nanning 530004,China; 4.SAIC-GM-Wuling Automobile Co.,Ltd.,Liuzhou Guangxi 545007,China) |
| |
Abstract: | In this paper,ETA/Dynaform was used for CN100 engine oil pan finite element simulation,To seeking maximize the benefits and explore the feasibility,two one-step drawing strategies were proposed,A node were picked randomly at the cracking region.According to the moving trace of the node,stress curves of three directions were obtained during the whole forming process.It was found that the stress causing cracking in the two sides came from Z direction of the nodes.and according to this can find the initial strategie of two-step drawing.. |
| |
Keywords: | CN 100 oil pan one-step drawing simulation |
本文献已被 CNKI 万方数据 等数据库收录! |
|