首页 | 本学科首页   官方微博 | 高级检索  
     

基于增益开关LD的高功率脉冲光纤激光器研究
引用本文:朱辰,王雄飞,张昆,李尧,张浩彬,张大勇,张利明.基于增益开关LD的高功率脉冲光纤激光器研究[J].激光与红外,2014,44(2):145-148.
作者姓名:朱辰  王雄飞  张昆  李尧  张浩彬  张大勇  张利明
作者单位:固体激光技术重点实验室,北京 100015
摘    要:进行了采用1064 nm增益开关LD全光纤高功率光纤放大的实验研究。采用三级级联光纤放大的方式,第一级放大为单包层光纤放大,第二、三级放大为双包层光纤放大。在第三级放大最大泵浦注入功率为45.2 W时,获得了25.3 W的脉冲激光输出,脉冲宽度223 ps,三级放大的光-光效率为55.9%。若后续进一步增大泵浦功率,则有望实现更高功率输出。

关 键 词:光纤光学  光纤放大器  皮秒脉冲  增益开关  全光纤

Experimental study of high power pulse fiber laser based on gain-switched LD
ZHU Chen,WANG Xiong-fei,ZHANG Kun,LI Yao,ZHANG Hao-bin,ZHANG Da-yong,ZHANG Li-ming.Experimental study of high power pulse fiber laser based on gain-switched LD[J].Laser & Infrared,2014,44(2):145-148.
Authors:ZHU Chen  WANG Xiong-fei  ZHANG Kun  LI Yao  ZHANG Hao-bin  ZHANG Da-yong  ZHANG Li-ming
Affiliation:Science and Technology on Solid-state Laser Laboratory,Beijing 100015,China
Abstract:Experimental study on all-fiber high power pulse fiber laser based on 1064 nm gain-switched laser diode is reported.The method of tri-stage cascade amplification is employed in the experimental.The first stage amplification is single-mode ytterbium-doped fiber,and gain medium of the second and third stage amplification is double-cladding fiber.Average power of 25.3W is obtained under a maximum 45.2 W pump power,and the optical-optical efficiency is 55.9%.The pulse width is 223 ps with center wavelength of 1064 nm.No nonlinear effect is observed by spectrometer,and the SNR is beyond 30 dB.A higher power laser output can be realized as the pump power is further enhanced.
Keywords:fiber optics  fiber amplifier  picosecond pulse  gain-switched  all-fiber
本文献已被 CNKI 等数据库收录!
点击此处可从《激光与红外》浏览原始摘要信息
点击此处可从《激光与红外》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号