首页 | 本学科首页   官方微博 | 高级检索  
     

基于小波变换模极大值的输电线路单端故障定位
引用本文:黄子俊,陈允平. 基于小波变换模极大值的输电线路单端故障定位[J]. 电力自动化设备, 2005, 25(2): 10-14
作者姓名:黄子俊  陈允平
作者单位:武汉大学,电气工程学院,湖北,武汉,430072;空军雷达学院,自动化工程系,湖北,武汉,430010;武汉大学,电气工程学院,湖北,武汉,430072
摘    要:基于故障行波的输电线路单端故障定位利用故障点的反射行波与入射行波到达母线的时间差计算故障距离,但如何区分来自故障点和对端母线的反射行波仍是一个难题。在分析故障点和母线的反射特性的基础上,利用电流行波线模分量小波变换的最初2个模极大值之问的相对极性区分来自故障点和对端母线的反射行波.并提出了一种改进的基于小波变换模极大值的输电线路单端故障快速定位方法,能够不受故障类型、故障电阻及耦合线路的影响。理论分析和仿真结果表明,该方法切实可行。

关 键 词:行波  小波变换  模极大值  故障测距
文章编号:1006-6047(2005)02-0010-05

Non-communication fault locating of transmission line based on wavelet modulus maxima
HUANG Zi-jun,CHEN Yun-ping. Non-communication fault locating of transmission line based on wavelet modulus maxima[J]. Electric Power Automation Equipment, 2005, 25(2): 10-14
Authors:HUANG Zi-jun  CHEN Yun-ping
Abstract:The fault distance is calculated based on the interval between the incident traveling wave and the reflected traveling wave from the fault point in one terminal fault locating. However,it is difficult to distinguish between reflected traveling waves from the fault point and from the remote bus. The reflection characteristics of fault point and buses are analyzed,and the reflected traveling waves from the fault point and from the remote bus are identified by comparing the polarities of their wavelet transform modulus maxima. An improved scheme based on wavelet transform modulus maxima for the fast one terminal fault locating of transmission lines is presented,which is independent of the fault type,fault impedance and mutual coupling effect. Theoretic analysis and simulations prove that the scheme is correct and effective.
Keywords:traveling waves  wavelet transform  modulus maxima  fault locating
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《电力自动化设备》浏览原始摘要信息
点击此处可从《电力自动化设备》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号