| 紫外光辐照Bi_(4-x)Nd_xTi_3O_(12)薄膜制备工艺 |
| |
| 引用本文： | 肖立华,王文,孟庆昌,柯华,贾德昌,周玉.紫外光辐照Bi_(4-x)Nd_xTi_3O_(12)薄膜制备工艺[J].稀有金属材料与工程,2009,38(Z2). |
| |
| 作者姓名： | 肖立华 王文 孟庆昌 柯华 贾德昌 周玉 |
| |
| 作者单位： | 哈尔滨工业大学,黑龙江,哈尔滨,150001 |
| |
| 基金项目： | 国家自然科学基金资助，黑龙江省青年基金，哈尔滨工业大学创新团队 |
| |
| 摘 要： | 以Pt(111)/Ti/SiO_2/Si为基片,采用溶胶凝胶法,通过紫外光辐照钕掺杂钛酸铋(Bi_(4-x)Nd_xTi_3O_(12), x=0.25, 0.75)胶体,分别采用电泳沉积和甩胶沉积制备薄膜,并对比了制备的薄膜质量.通过差热-热重分析(DSC-TG)、X射线衍射(XRD)、原子力显微镜(AFM)等技术手段对Sol-Gel法制备的BNT薄膜进行了表征.研究结果表明,经紫外光辐照和电泳沉积制备的Bi_(4-x)Nd_xTi_3O_(12) (x=0.25, 0.75) 薄膜于300 ℃煅烧有机物,500 ℃随炉热处理,可得到均匀致密且(117)择优取向的钙钛矿相BNT薄膜.
|
| 关 键 词： | Bi_(4-x)Nd_xTi_3O_(12)薄膜 溶胶-凝胶 紫外光辐照 |
Synthesis of Bi_(4-x)Nd_xTi_3O_(12) Thin Film by UV-Light Irradiation |
| |
| Xiao Lihua,Wang Wen,Meng Qingchang,Ke Hua,Jia Dechang,Zhou Yu.Synthesis of Bi_(4-x)Nd_xTi_3O_(12) Thin Film by UV-Light Irradiation[J].Rare Metal Materials and Engineering,2009,38(Z2). |
| |
| Authors: | Xiao Lihua Wang Wen Meng Qingchang Ke Hua Jia Dechang Zhou Yu |
| |
| Affiliation: | Xiao Lihua,Wang Wen,Meng Qingchang,Ke Hua,Jia Dechang,Zhou Yu (Harbin Institute of Technology,Harbin 150001,China) |
| |
| Abstract: | The films of neodymium-doped Bi_4Ti_3O_(12)(Bi_(4-x)Nd_xTi_3O_(12), x=0.25, 0.75, BNT) were synthesized by sol-gel using UV-light irradiation on Pt(111)/Ti/SiO_2/Si substrate, then they were investigated by differential scanning calorimetry-thermogravimetry (DSC-TG), atomic force microscope(AFM) and X-ray diffraction (XRD) technology. The results show that the BNT thin films are uniform and dense. After thin films were deposited using electrophoresis and UV-irradiation , annealed at 300 ℃, and then crystallized at 500 ℃for 30 min, pure perovskite phases were obtained. XRD indicated that BNT thin film had (117) predominate orientation. |
| |
| Keywords: | Bi_(4-x)Nd_xTi_3O_(12) thin films sol-gel processing UV-irradiation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
