Monolith‐ and Silica‐Supported Carboxylate‐Based Grubbs–Herrmann‐Type Metathesis Catalysts

The synthesis of silica‐ and monolith‐supported Grubbs–Herrmann‐type catalysts is described. Two polymerizable, carboxylate‐containing ligands, exo, exo‐7‐oxanorborn‐2‐ene‐5,6‐dicarboxylic anhydride and 7‐oxanorborn‐2‐ene‐5‐carboxylic acid were surface‐immobilized onto silica‐ and ring‐opening metathesis (ROMP‐) derived monolithic supports using “grafting‐from” techniques. The “1^st generation Grubbs catalyst”, RuCl₂(CHPh)(PCy₃)₂, was used for these purposes. In addition, a poly(norborn‐2‐ene‐b‐exo, exo‐norborn‐2‐ene‐5,6‐dicarboxylic anhydride)‐coated silica 60 was prepared. The polymer supported anhydride and carboxylate groups were converted into the corresponding mono‐ and disilver salts, respectively, and reacted with the Grubbs–Herrmann catalyst RuCl₂(CHPh)(IMesH₂)(PCy₃) [IMesH₂=1,3‐bis(2,4,6‐trimethylphenyl)‐4,5‐dihydroimidazol‐2‐ylidene]. Heterogenization was accomplished by exchange of one chlorine ligand with the polymeric, immobilized silver carboxylates to yield monolith‐supported catalysts 4, 5 , and 6 as well as silica‐supported systems 7, 8 and 9 . The actual composition of these heterogenized catalysts was proven by the synthesis of a homogeneous analogue, RuCl[7‐oxanorbornan‐2‐(COOAg)‐3‐COO](CHPh)(IMesH₂)(PCy₃) ( 3 ). All homogeneous and heterogeneous catalysts were used in ring‐closing metathesis (RCM) of diethyl diallylmalonate, 1,7‐octadiene, diallyldiphenylsilane, methyl trans‐3‐pentenoate, diallyl ether, N,N‐diallyltrifluoracetamide and t‐butyl N,N‐diallylcarbamate allowing turnover numbers (TON's) close to 1000. In a flow‐through set‐up, an auxiliary effect of pendant silver carboxylates was observed with catalyst 5 , where the silver moiety functions as a (reversible) phosphine scavenger that both accelerates initiation and stabilizes the catalyst by preventing phosphine elution. Detailed catalytic studies were carried out with the monolith‐supported systems 4 and 6 in order to investigate the effects of temperature and chain‐transfer agents (CTA's) such as cis‐1,4‐diacetoxybut‐2‐ene. In all RCM experiments Ru‐leaching was low, resulting in a Ru‐content of the RCM products ≤3.5 μg/g (3.5 ppm).