| 原位反应增容无机非卤阻燃ABS微观结构研究 |
| |
| 引用本文： | 刘芳,黄伟,贾德民,蓝伟哲,陈继明,蓝咏哲.原位反应增容无机非卤阻燃ABS微观结构研究[J].中国塑料,2006,20(1):22-24. |
| |
| 作者姓名： | 刘芳 黄伟 贾德民 蓝伟哲 陈继明 蓝咏哲 |
| |
| 作者单位： | [1]华南理工大学材料科学与工程学院,广东广州510640 [2]汕尾绿美环境科技开发有限公司,广东汕尾516600 |
| |
| 基金项目： | 广东省科技攻关项目（2003C33501） |
| |
| 摘 要： | 利用扫描电镜对原位反应增容技术制各的无机非卤阻燃ABS母粒及材料的界面形态进行了系统研究，考察了无机非卤阻燃剂与ABS树脂间的相容性。结果表明：采用该法制得的无机非卤阻燃ABS材料阻燃剂粒子被基体树脂包覆后均匀地分散在ABS树脂中，很难看出阻燃剂与ABS之问明显的界面，断裂截面显示出韧性断裂的基本特征，无机非卤阻燃剂与ABS良好的相容性是母粒法加工技术和原位反应增容技术共同作用的结果。
|
| 关 键 词： | 非卤阻燃ABS 原位反应 微观结构 相容性 |
| 文章编号： | 1001-9278（2006）01-0022-03 |
| 收稿时间： | 2005-09-19 |
| 修稿时间： | 2005-09-19 |
Study on Microstructure of Inorganic Halogen-free Flame Retardant ABS Prepared by In-situ Reaction Compatibilization |
| |
| LIU Fang, HUANG Wei, JIA De-min, LAN Wei-zhe, CHEN Ji-ming, LAN Yong-zhe.Study on Microstructure of Inorganic Halogen-free Flame Retardant ABS Prepared by In-situ Reaction Compatibilization[J].China Plastics,2006,20(1):22-24. |
| |
| Authors: | LIU Fang HUANG Wei JIA De-min LAN Wei-zhe CHEN Ji-ming LAN Yong-zhe |
| |
| Affiliation: | 1. College of Material Science and Engineering, South China University of Technology, Guangzhou 510640, China; 2. Shanwei Lumei Environmental Science Company Limited, Shanwei 516600, China |
| |
| Abstract: | A halogen-free flame retardant masterbatch was prepared by in-situ polymerization of a polar vinyl monomer initiated with DCP in ABS matrix, and subsequently blended with Al(OH)3 and Mg(OH)2. This masterbatch was introduced into neat ABS resin to yield a halogen-free flame retardant ABS. SEM revealed that the inorganic particles were well dispersed in matrix. The fractured surface showed a ductile feature. |
| |
| Keywords: | halogen-free flame retardant acrylnitrile-butadiene-styrene copolymer in-situ reaction microstructure compatibility |
| 本文献已被 CNKI 维普 等数据库收录！ |
