| 喷磨法测定铝合金阳极氧化膜耐磨性的影响因素 |
| |
| 引用本文： | 纪红,李永丰.喷磨法测定铝合金阳极氧化膜耐磨性的影响因素[J].理化检验(物理分册),2012(11):724-726. |
| |
| 作者姓名： | 纪红 李永丰 |
| |
| 作者单位： | 北京有色金属研究总院分析测试技术研究所,北京100088 |
| |
| 基金项目： | 科技部创新方法工作专项项目《新型高性能铝合金理化分析方法的研究》（2009IM031900） |
| |
| 摘 要： | 铝合金阳极氧化膜的耐磨性反映了膜层对摩擦作用的抵抗能力,是氧化膜的一个重要质量指标,可通过喷磨试验来进行测试。考察了测试压力、测试角度、测试距离等对喷磨试验结果的影响。结果表明:喷磨时间随着测试角度的增大而减少,随着测试压力的增大而减小,随着测试距离的变化出现先减少后增加的趋势。对于不同的试样,应选择合适的试验参数来进行检测。
|
| 关 键 词： | 阳极氧化膜 喷磨试验 测试压力 测试角度 |
Influence Factors for Abrasive Resistance of Aluminum Alloy Anodic Oxide Coatings by Abrasive Jet Method |
| |
| JI Hong,LI Yong-feng.Influence Factors for Abrasive Resistance of Aluminum Alloy Anodic Oxide Coatings by Abrasive Jet Method[J].Physical Testing and Chemical Analysis Part A:Physical Testing,2012(11):724-726. |
| |
| Authors: | JI Hong LI Yong-feng |
| |
| Affiliation: | JI Hong, L1 Yong-feng (Center for Analytical Technology, General Research Institute {or Non-{errous Metals, Beijing 100088, China) |
| |
| Abstract: | The abrasive resistance is an important quality index reflecting erosion or wear resistance of aluminum alloy anodic oxidation coating. It can be evaluated by abrasive jet test method. Some main influence factors for abrasive jet test were researched, including test pressure, test angle and test distance etc. The results showed that the abrasive jet time decreased as the increases in test angle, the abrasive jet time decreased as the increases in test pressure, the abrasive jet time decreased and then increased as the increases in test distance. Different test parameters should be used for different samples. |
| |
| Keywords: | anodic oxidation coating abrasive jet testl test pressure test angle |
| 本文献已被 CNKI 维普 等数据库收录！ |
