| 基于ADAMS的非对称渐开线齿轮动力学仿真 |
| |
| 引用本文： | 朱旭辉.基于ADAMS的非对称渐开线齿轮动力学仿真[J].机电工程技术,2014(8):107-110. |
| |
| 作者姓名： | 朱旭辉 |
| |
| 作者单位： | 杭州应用声学研究所,浙江杭州310012 |
| |
| 摘 要： | 根据渐开线齿轮啮合原理,推导了基于某一坐标系统的非对称渐开线齿轮齿廓曲线方程。利用Autodesk Inventor软件的VBA二次开发技术,对非对称齿轮的三维实体模型进行了构建。通过对非对称齿轮动力学模型等价变换,利用ADAMS虚拟样机技术,对非对称齿轮动态啮合传动过程进行了仿真,并与对称齿轮仿真结果进行了对比研究。
|
| 关 键 词： | 非对称渐开线齿轮 VBA二次开发技术 动态啮合 ADAMS仿真 |
Dynamic Simulation of Asymmetric Involute Spur Gear Transmission with ADAMS |
| |
| ZHU Xu-hui.Dynamic Simulation of Asymmetric Involute Spur Gear Transmission with ADAMS[J].Mechanical & Electrical Engineering Technology,2014(8):107-110. |
| |
| Authors: | ZHU Xu-hui |
| |
| Affiliation: | ZHU Xu-hui (Hangzhou Applied Acoustics Research Institute, Hangzhou 310012, China) |
| |
| Abstract: | On the basis of the gear meshing theory, the curve equation of asymmetric involute tooth profile was derived. And the three-dimensional entity model of asymmetric involute gear was created by using the secondary development technology of VBA within the software of Autodesk Inventor. In order to get the dynamic model of asymmetric gear transmission, an equivalent transformation method was proposed. Whereafter, dynamic characteristics of asymmetric involute spur gear transmission were researched by simulating the virtual prototype model with ADAMS. Meanwhile, the dynamic characteristics of symmetric involute spur gear transmission were compared,to prove whether the asymmetric gear is better in the dynamic meshing process. |
| |
| Keywords: | asymmetric involute spur gear secondary development technology of VBA dynamic meshing process simulation with AD-AMS |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
