| 基于Inventor的光机底座的优化设计 |
| |
| 引用本文： | 赵保方,杨长明.基于Inventor的光机底座的优化设计[J].机电工程技术,2014(4):92-95. |
| |
| 作者姓名： | 赵保方 杨长明 |
| |
| 作者单位： | [1]海装装备采购中心,北京100017 [2]中船重工第七一八研究所,河北邯郸056027 |
| |
| 摘 要： | 使用Inventor软件建立光机底座三维实体模型,并利用有限元分析模块对零件进行了模态分析得到光机底座的各阶振型和固有频率。通过分析得到的固有频率与设备所受激振频率接近,通过优化底座设计,改变了零件的固有频率。
|
| 关 键 词： | 光机底座 有限元法 模态分析 |
Optical-Mechanical Base Model Analysis Based on the Inventor Software |
| |
| ZHAO Bao-fang,YANG Chang-ming.Optical-Mechanical Base Model Analysis Based on the Inventor Software[J].Mechanical & Electrical Engineering Technology,2014(4):92-95. |
| |
| Authors: | ZHAO Bao-fang YANG Chang-ming |
| |
| Affiliation: | 1.Equipment Procurement Center of Navy, Beijing100017, China; 2.Purification Equipment Research Institute of CSIC, Handan056027, China) |
| |
| Abstract: | A Three-dimensional entity model of optical-mechanical base is built with the Inventor software, and model analysis is carried out by using the finite element analysis module existing in the Inventor. Mode of varies order of optical-mechanical base and its natural frequency of longitudinal vibration are obtained. Shape design and dynamics analysis are integrated in the Inventor software, and thus the design of Optical-mechanical base is simplified. |
| |
| Keywords: | optical-mechanicalbase finite element method modelanalysis |
| 本文献已被 CNKI 维普 等数据库收录！ |
