| 基于VB6.0的盘形凸轮机构CAD系统设计 |
| |
| 引用本文： | 冀晓红,丁勇. 基于VB6.0的盘形凸轮机构CAD系统设计[J]. 机械研究与应用, 2011, 0(4): 62-63,67 |
| |
| 作者姓名： | 冀晓红 丁勇 |
| |
| 作者单位： | 1. 沈阳理工大学,辽宁沈阳,110159
2. 沈空房管处,辽宁洗阳,110044 |
| |
| 摘 要： | 利用面向用户的可视化软件Visual Basic 6.0进行盘形凸轮机构CAD系统设计。输入原始参数得到该参数下的凸轮廓线及有关数据,缩短了解析法设计凸轮廓线时数据处理时间,提高设计工作效率,使凸轮机构的设计直观化、实时化。通过实例验证,该软件界面友好,方便直观,既可用于工程实际,又可满足教学需要。
|
| 关 键 词： | Visual Basic 凸轮机构 运动仿真 |
The CAD system design of cam mechanism based on VB6.0 |
| |
| Ji Xiao-hong,Ding Yong. The CAD system design of cam mechanism based on VB6.0[J]. Mechanical Research & Application, 2011, 0(4): 62-63,67 |
| |
| Authors: | Ji Xiao-hong Ding Yong |
| |
| Affiliation: | Ji Xiao-hong1,Ding Yong2(1 Shenyang university of technology,Shenyang Liaoning 110159,China,(2 Shenyang air force house management department,Shenyang Liaoning 110044,China) |
| |
| Abstract: | The design on CAD system of cam mechanism with VB6.0 to user is introduced in this paper.After the parameters are inputted,the cam and dates are obtained,it could shorten dates management time of resolution designing cam,and also could improve the design efficiency,the design is intuitionistic.The example we made may prove the software has friendly interface,using conveniently.It can meet not only practice but also teaching. |
| |
| Keywords: | Visual Basic cam mechanism motion imitation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
