| 复杂光学表面的快刀伺服加工特性与路径规划 |
| |
| 引用本文： | 王贵林,朱登超,戴一帆.复杂光学表面的快刀伺服加工特性与路径规划[J].机械工程学报,2011,47(15):175-180. |
| |
| 作者姓名： | 王贵林 朱登超 戴一帆 |
| |
| 作者单位： | 国防科技大学机电工程与自动化学院 长沙 410073 |
| |
| 基金项目： | 国家自然科学基金资助项目(50975277) |
| |
| 摘 要： | 复杂面形和微结构阵列等类型的光学元件应用范围越来越广,传统的机械加工方法难以满足面形精度和加工效率要求,超精密快刀伺服(Fast tool servo,FTS)是实现这类零件优质高效加工的有效手段.但是在复杂光学表面的快刀伺服加工中,面形的高低起伏将会使刀具和工件的相对位置实时变化,导致加工状态恶化、面形精度下降,甚至...
|
| 关 键 词： | 复杂面形 快刀伺服 切削角 刀具干涉 路径规划 |
Machining Characteristics and Route Planning of Complex Optical Surface by Using Fast Tool Servo |
| |
| WANG Guilin,ZHU Dengchao,DAI Yifan.Machining Characteristics and Route Planning of Complex Optical Surface by Using Fast Tool Servo[J].Chinese Journal of Mechanical Engineering,2011,47(15):175-180. |
| |
| Authors: | WANG Guilin ZHU Dengchao DAI Yifan |
| |
| Affiliation: | WANG Guilin ZHU Dengchao DAI Yifan(School of Mechatronics Engineering and Automation,National University of Defense Technology,Changsha 410073) |
| |
| Abstract: | Optical components with complex surfaces or microstructure array are more and more widely applied,but it is very difficult to satisfy the requirements of surface accuracy and machining efficiency by using traditional mechanical fabricating methods.Ultraprecision fast tool servo(FTS) system can manufacture these complex surfaces efficiently and accurately.The relative position between the tool and workpiece surface will vary continuously in the FTS machining process,owing to the height change of workpiece pr... |
| |
| Keywords: | Complex surface Fast tool servo Cutting angle Tool interference Route planning |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
