平头钢弹侵彻钢靶板过载特性的数值分析 |
| |
引用本文: | 卢玉斌,程永生,孙远程.平头钢弹侵彻钢靶板过载特性的数值分析[J].四川兵工学报,2013(12):119-122. |
| |
作者姓名: | 卢玉斌 程永生 孙远程 |
| |
作者单位: | [1]中国工程物理研究院电子工程研究所,四川绵阳621900 [2]西南科技大学制造过程测试技术教育部重点实验室,四川绵阳621010 |
| |
基金项目: | 中国博士后基金(2012M511943). |
| |
摘 要: | 利用LS-DYNA软件,研究了平头钢弹侵彻钢靶板时的过载特性,针对几种典型的弹体初速度、弹体长径比进行了模拟计算,得到了各种条件下的弹体侵彻过载曲线,分析结果表明:着速、弹体长径比及弹体结构响应对侵彻过载均有很大影响,并得到一些定量结论,可为硬目标侵彻引信的设计及抗高过载加速度传感器的选择提供理论依据。
|
关 键 词: | LS-DYNA 侵彻 过载特性 数值分析 |
Numerical Analysis on Overload Characteristics of Flat-end Steel Projectiles Penetrating Steel Plates |
| |
Authors: | LU Yu-bin CHENG Yong-sheng SUN Yuan-cheng |
| |
Affiliation: | 1. Institute of Electronic Engineering, CAEP, Mianyang 621900, China; 2. Ministry of Education Key Laboratory of Testing Technology for Manufacturing Process, Southwest University of Science and Technology, Mianyang 621010, China) |
| |
Abstract: | The overload characteristics of fiat-end projectiles penetrating steel plate targets were simulated using LS-DYNA. Based on typical penetration velocities and projectile slenderness ratios, simulations were conducted, and the corresponding overload-time curves of projectiles were obtained. The simulation results indicate that the impact velocity, projectile slenderness ratio and structural response of projectiles have in-fluence on penetration overload, and some quantitative conclusions are obtained. The simulation results provide theoretical basis for hard target penetrating fuse design and the selection of high accelerometers. |
| |
Keywords: | LS-DYNA penetration overload characteristics numerical simulation |
本文献已被 维普 等数据库收录! |