| 电缆用铜/铝复合带制备工艺研究 |
| |
| 引用本文： | 赵鸿金,张迎晖,王达,杨斌,徐高磊.电缆用铜/铝复合带制备工艺研究[J].江西有色金属,2010(1):15-17,23. |
| |
| 作者姓名： | 赵鸿金 张迎晖 王达 杨斌 徐高磊 |
| |
| 作者单位： | 江西理工大学材料与化学工程学院,江西赣州341000 |
| |
| 基金项目： | 国家自然科学基金资助项目（50964006） |
| |
| 摘 要： | 研究了制备工艺对电缆用铜/铝复合带组织和性能的影响.结果表明：电缆用铜/铝复合带冷轧复合加工率应大于67%,合理的退火工艺为310℃×1.5h.铜/铝复合界面是通过轧制物理结合-退火冶金结合机理形成的.
|
| 关 键 词： | 铜/铝复合带 冷轧复合 退火工艺 界面复合机理 |
Production Process of Cu/Al Cladding Strip Used for Cable |
| |
| ZHAO Hong-jin,ZHANG Ying-hui,WANG Da,YANG Bin,XU Gao-lei.Production Process of Cu/Al Cladding Strip Used for Cable[J].Jiangxi Nonferrous Metals,2010(1):15-17,23. |
| |
| Authors: | ZHAO Hong-jin ZHANG Ying-hui WANG Da YANG Bin XU Gao-lei |
| |
| Affiliation: | (Faculty of Materials and Chemical Engineering,Jiangxi University of Science and Technology,Ganzhou 341000,China) |
| |
| Abstract: | This paper studies the production process of copper/aluminum cladding strip used for cable on different cold rolling and annealing process.The results showed that cold rolling rate should larger than 67 %.And the proper annealing process for Cu/Al cladding strip was carried out at 31℃ for 1.5 hours.The mechanism of interface combination was composed by physical combination in cold rolling and metallurgical combination in annealing. |
| |
| Keywords: | copper/aluminum cladding strip cold rolling annealing process mechanism of interface combination |
| 本文献已被 维普 等数据库收录！ |
