| Fe-Cu 系机械球磨合金化研究 |
| |
| 引用本文： | 楚伟峰,赵烈伟,吴欣. Fe-Cu 系机械球磨合金化研究[J]. 精密成形工程, 2014, 6(2): 41-44,50 |
| |
| 作者姓名： | 楚伟峰 赵烈伟 吴欣 |
| |
| 作者单位： | 安徽江淮汽车股份有限公司, 合肥 230601;安徽江淮汽车股份有限公司, 合肥 230601;哈尔滨工业大学, 威海 264200 |
| |
| 摘 要： | 目的为了实现Fe粉和Cu粉的合金化及观察其过程变化。方法采用机械球磨的方法,利用扫描电子显微镜等仪器,对球磨过程中的组织演变过程及微观形貌进行了研究。结果通过球磨得到了十几个纳米尺寸的晶粒。结论通过球磨可以得到过饱和固溶体。
|
| 关 键 词： | Fe-Cu 机械合金化 固溶度 晶粒尺寸 |
| 收稿时间： | 2013-12-12 |
| 修稿时间： | 2014-03-01 |
Fe-Cu Alloy System Induced by Mechanical Alloying |
| |
| CHU Wei-feng,ZHAO Lie-wei and WU Xin. Fe-Cu Alloy System Induced by Mechanical Alloying[J]. Journal of Netshape Forming Engineering, 2014, 6(2): 41-44,50 |
| |
| Authors: | CHU Wei-feng ZHAO Lie-wei WU Xin |
| |
| Affiliation: | Jianghuai Automobile Co. , Ltd. , Hefei 230601, China;Jianghuai Automobile Co. , Ltd. , Hefei 230601, China;Harbin Institute of Technology, Weihai 264200, China |
| |
| Abstract: | Objective To realize the Fe powder and Cu powder alloying and to observe its process changes. Methods Using the methods of mechanical ball milling, the evolution and morphology in the process of milling were studied using scanning electron microscopy. Results The results showed that grains of 10 nm size were obtained by ball milling. Conclusion Supersaturated solid solution could be obtained by ball milling. |
| |
| Keywords: | Fe-Cu mechanical alloying solid solution grain size |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载免费的PDF全文 |
|
