| 板形测量辊输出信号处理方法的研究与应用 |
| |
| 引用本文： | 刘佳伟,张殿华,王鹏飞,王军生.板形测量辊输出信号处理方法的研究与应用[J].钢铁研究学报,2010,22(2):59-59. |
| |
| 作者姓名： | 刘佳伟 张殿华 王鹏飞 王军生 |
| |
| 作者单位： | 1. 东北大学轧制技术及连轧自动化国家重点实验室,辽宁,沈阳,110004
2. 鞍钢股份有限公司,辽宁,鞍山,114001 |
| |
| 基金项目： | 国家自然科学基金资助项目(50534020) |
| |
| 摘 要： | 板形测量值是板形控制系统中的重要组成部分,它的准确性直接关系到板形控制的效果。研究了1780冷连轧机板形控制系统的板形检测原理及控制方法。通过对数据处理方法的分析,应用通道数确定、插值和滤波等方法对检测数据进行处理,能够有效地抑制板形检测数据中的干扰影响,提高了测量系统的抗干扰能力。用这种数据处理方法对实测板形值进行了处理,取得良好效果,充分说明这种数据处理方法是1种理想的板形数据处理方法。
|
| 关 键 词： | 板形检测 带材信号处理 插值 滤波 |
| 收稿时间： | 2009-01-19; |
Research and Application of Shape Measuring Roll Output Signal Processing Method |
| |
| LIU Jia-wei,ZHANG Dian-hua,WANG Peng-fei,WANG Jun-sheng.Research and Application of Shape Measuring Roll Output Signal Processing Method[J].Journal of Iron and Steel Research,2010,22(2):59-59. |
| |
| Authors: | LIU Jia-wei ZHANG Dian-hua WANG Peng-fei WANG Jun-sheng |
| |
| Affiliation: | 1.State Key Laboratory of Rolling and Automation;Northeastern University;Shenyang 110004;Liaoning;China;2.Anshan Iron and Steel Company;Anshan 114001;China |
| |
| Abstract: | The strip flatness measuring value is important for flatness control.The accuracy value has direction effect on shape control.A throughout investigation was carried out on the flatness measurement system and shape control system of a 1780 tandem cold mill.On the basis of analyzing the data processing method,a strategy consisting of channel-number determination,interpolation and data filter was used in flatness control system.It was found that this strategy could improve disturbance rejection of system.When ... |
| |
| Keywords: | flatness measurement strip signal processing interpolation data wave filtering |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《钢铁研究学报》浏览原始摘要信息 |
|
点击此处可从《钢铁研究学报》下载全文 |
|
