| 可重构制造系统集成设计框架研究 |
| |
| 引用本文： | 王国新,宁汝新,王爱民,唐承统.可重构制造系统集成设计框架研究[J].计算机集成制造系统,2007,13(8):1481-1489,1510. |
| |
| 作者姓名： | 王国新 宁汝新 王爱民 唐承统 |
| |
| 作者单位： | 北京理工大学,机械与车辆工程学院,北京,100081 |
| |
| 基金项目： | 解放军总装备部预研项目
,
国防科技应用基础研究基金 |
| |
| 摘 要： | 提出了基于可重构制造单元的可重构制造系统集成设计框架.在该框架中,从规划和运行方面阐述了可重构制造系统的设计目标、设计流程及采用的关键技术,建立了支持可重构制造系统实施的计算机辅助设计系统的功能模型和体系结构,并讨论了系统的内部集成和外部集成问题.根据该设计框架,开发了集重构、布局规划、生产调度和仿真优化为一体的软件系统,该系统现已应用于航天、船舶和兵器部门.
|
| 关 键 词： | 可重构制造系统 布局规划 生产调度 仿真优化 可重构制造系统 集成设计 框架研究 manufacturing system framework design 部门 兵器 船舶 航天 应用 软件系统 仿真优化 生产调度 布局规划 开发 问题 外部集成 内部集成 体系结构 |
| 文章编号： | 1006-5911（2007）08-1481-09 |
| 收稿时间： | 2006-11-24 |
| 修稿时间： | 2006-11-242007-02-05 |
Integrated design framework for reconfigurable manufacturing system |
| |
| WANG Guo-xin,NING Ru-xin,WANG Ai-min,TANG Cheng-tong.Integrated design framework for reconfigurable manufacturing system[J].Computer Integrated Manufacturing Systems,2007,13(8):1481-1489,1510. |
| |
| Authors: | WANG Guo-xin NING Ru-xin WANG Ai-min TANG Cheng-tong |
| |
| Abstract: | An integrated design framework based on reconfigurable manufacturing cell for Reconfigurable Manufacturing System(RMS) was put forward.In this framework,design goals,design process and critical technology adopted in each stage were discussed from perspectives of system planning and operation control.Based on the two stages,function model and architecture of computer aided RMS design system were constructed.Moreover,internal and external integrations of system were discussed.Based on the design framework,an integrated system named BITRMS which comprised of production system reconfiguration,layout,production scheduling and simulation optimization was developed,and it was applied in aerospace,shipbuilding and ordnance enterprises. |
| |
| Keywords: | reconfigurable manufacturing system layout production scheduling simulation optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
