Effect of Oxygen Partial Pressure during Sintering on the Microstructure of Mg-PSZ with Strontia and Silica Additions |
| |
Authors: | John Drennan David R Clarke Richard H J Hannink Thomas M Shaw |
| |
Affiliation: | Division of Materials Science and Technology, CSIRO, Clayton, Australia;Materials Department, University of California, Santa Barbara, California 93106–5050;Division of Materials Science and Technology, CSIRO, Clayton, Australia;IBM Research Division, Yorktown Heights, New York 10598 |
| |
Abstract: | The microstructure, average grain size, and density of Mg-PSZ sintered with SrO and SiO2 additions are found to depend on the partial pressure of oxygen in the sintering atmosphere. Over the range of 10?1 to 10° atm, both the average grain size and the density increase with oxygen partial pressure, for a constant SrO/SiO2 ratio. The partial pressure of oxygen also affects the microstructural distribution of the remnant liquid phase. At high partial pressures the liquid phase is uniformly distributed, whereas at lower oxygen pressures it is preferentially located near the surface. It is proposed that the microstructure produced by sintering is the result of a competition between liquid-phase-enhanced densification and the migration of the liquid phase to the free surface. The migration is attributed to vaporization of MgO from the liquid phase which increases with decreasing partial pressure of oxygen. |
| |
Keywords: | |
|
|