Dynamical modeling and experimental validation of a micro-speaker with corrugated diaphragm for mobile phones

As the design trend of modern cellular phones evolves to be miniaturization and versatile sound in quality, the electro-mechanical components including the micro-speaker are essential toward size reduction and broad frequency range of sound. To reduce size, a diaphragm type micro-speaker is commonly employed in industry, while to broaden the sound frequency range corrugations on the diaphragm are adopted. The corrugations are generally capable of leading to fairly flat response over a broad range since diaphragm stiffness is decreased in axial direction. To confirm the aforementioned capability, the modeling on a corrugated diaphragm is performed first using finite element method (FEM) to obtain the associated dynamic equations in terms of modal coordinates; then the equations are next combined with the magneto-electrical model of the voice coil motor (VCM) that is attached to the bottom side of the diaphragm. Finally, the acoustic effects of the air inertia on the diaphragm and vents of the outer case are modeled using basic acoustic theories. Assembling all derived system equations and solving them, the frequency response of the micro-speaker in sound pressure level (SPL) can be simulated. It shows that the diaphragm corrugation in fact helps flatten the SPL response of the micro-speaker (especially in high frequency range) to lessen sound distortion. Furthermore, the corrugation angle approximately below 45° is favored over other angles or flatter SPL response. Experiments are also conducted to verify the theoretical findings.