| Sn-0.7Cu无铅钎料对铜引线材料的润湿性 |
| |
| 引用本文： | 陈方,杜长华,黄福祥,杜云飞. Sn-0.7Cu无铅钎料对铜引线材料的润湿性[J]. 材料导报, 2004, 18(9): 99-101 |
| |
| 作者姓名： | 陈方 杜长华 黄福祥 杜云飞 |
| |
| 作者单位： | 重庆工学院材料学院,重庆,400050;重庆工学院材料学院,重庆,400050;重庆工学院材料学院,重庆,400050;重庆工学院材料学院,重庆,400050 |
| |
| 摘 要： | 采用改性熔炼工艺制备了Sn-0.7Cu改性合金,用润湿平衡法研究了温度、钎剂中卤素含量、浸渍时间对铜引线材料润湿性的影响,并与Sn-37Pb进行了对比.结果表明:升高温度可明显提高润湿性;当用R(非活性)钎剂时,Sn-0.7Cu对铜引线不润湿;随着钎剂中卤素离子的增加,其润湿性得到显著改善,钎剂中卤素含量以≥0.4wt%为宜;随浸渍时间的延长,润湿力明显降低,表明界面存在"失润现象".
|
| 关 键 词： | Sn-0.7Cu 无铅钎料 润湿 钎焊性 |
Wettabinity of Lead-free Solder Sn-0.7Cu on the Surface of Copper |
| |
| CHEN Fang DU Changhua HUANG Fuxiang DU Yunfei. Wettabinity of Lead-free Solder Sn-0.7Cu on the Surface of Copper[J]. Materials Review, 2004, 18(9): 99-101 |
| |
| Authors: | CHEN Fang DU Changhua HUANG Fuxiang DU Yunfei |
| |
| Abstract: | The Sn-0. 7Cu alloy was prepared by a special melting technique. Several effect factors on wetting, i.e. temperature of soldering, Cl~-content in flux,wetting time etc.,is studied by wetting balance method and compared with the results of Sn-37Pb. The results indicate that the rise of the temperature can remarkably improve the wettability of Sn-0. 7Cu on the face of copper. Sn-0. 7Cu alloy can not wet copper with R type flux. With an increase of Cl~-content in flux, the wettability of Sn-0. 7Cu remarkably improves and the best Cl~-content is more than 0. 4wt%. Wetting force fall with the delay of time, indicate there is"lose-wetting phenomena"in the interface of solder and copper. |
| |
| Keywords: | Sn-0.7Cu |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
