| 基于PC的超声磨削主轴变频调速系统设计 |
| |
| 引用本文： | 丁仕燕,徐家文,黄志荣,毛建秋,干为民.基于PC的超声磨削主轴变频调速系统设计[J].常州工学院学报,2007,20(6):18-20. |
| |
| 作者姓名： | 丁仕燕 徐家文 黄志荣 毛建秋 干为民 |
| |
| 作者单位： | 常州工学院机电工程学院,江苏,常州,213002;常州市特种加工实验室,江苏,常州,213002;南京航空航天大学机电学院,江苏,南京,210016;常州工学院机电工程学院,江苏,常州,213002 |
| |
| 基金项目： | 江苏省自然科学基金
,
江苏省高校自然科学基金 |
| |
| 摘 要： | 文章介绍了数控超声磨削成形加工装置中的磨轮主轴的驱动方案,完成了数字控制器设计。调速系统基于PC机和DOS操作系统,用BorlandC++和汇编作为开发工具,进行了主轴变频调速控制系统软、硬件设计,调速系统已经与加工装置配套使用,满足工艺试验要求。
|
| 关 键 词： | 超声磨削 变频调速 数字控制器 |
| 文章编号： | 1671-0436(2007)06-0018-03 |
| 修稿时间： | 2007年10月26 |
The Design of Spindle's Variable Frequency and Variable Speed System Based on PC for Ultrasonic Grinding Device |
| |
| DING Shi-yan,XU Jia-wen,HUANG Zhi-rong,MAO Jian-qiu,GAN Wei-min.The Design of Spindle's Variable Frequency and Variable Speed System Based on PC for Ultrasonic Grinding Device[J].Journal of Changzhou Institute of Technology,2007,20(6):18-20. |
| |
| Authors: | DING Shi-yan XU Jia-wen HUANG Zhi-rong MAO Jian-qiu GAN Wei-min |
| |
| Abstract: | This paper introduces the project of the spindle's driving,and the design of digital controller.Bbased on PC and DOS operating system,and by using the development tool of Borland C and assemble language,the system hardware and software design have been finished.The system and the grinding device have been put into operation,and have met the requirement of technological experiment. |
| |
| Keywords: | ultrasonic grinding variable frequency and variable speed digital controller |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
