首页 | 本学科首页   官方微博 | 高级检索  
     

增设翼墙加固框架柱正截面承载力研究
引用本文:范超,王汝恒,贾彬,郭文. 增设翼墙加固框架柱正截面承载力研究[J]. 工业建筑, 2011, 41(4): 38-41,123
作者姓名:范超  王汝恒  贾彬  郭文
作者单位:西南科技大学土木工程与建筑学院,四川绵阳,621010
基金项目:国家支撑计划863项目
摘    要:汶川地震中,大量框架结构由于柱抗侧刚度不足产生破坏,增设翼墙加固框架结构能有效提高其抗侧刚度.通过对实际工程的翼墙加固柱进行了截面承载力分析,采用数值积分方法得出此类异形截面在双向偏心作用下正截面的N-M曲线、Mx-My曲线,并计算出实际工程中,单片翼墙不同配筋的Mx-My 包络图,为截面设计及截面复核提供参考依据.

关 键 词:增设翼墙加固  双向偏心  正截面承载力  数值积分

BEARING CAPACITY OF FRAME'S COLUMN STRENGTHENED WITH ADDITIONAL FLANGE WALL
Fan Chao,Wang Ruheng,Jia Bin,Guo Wen. BEARING CAPACITY OF FRAME'S COLUMN STRENGTHENED WITH ADDITIONAL FLANGE WALL[J]. Industrial Construction, 2011, 41(4): 38-41,123
Authors:Fan Chao  Wang Ruheng  Jia Bin  Guo Wen
Affiliation:Fan Chao Wang Ruheng Jia Bin Guo Wen(School of Civil Engineering and Architecture,Southwest University of Science and Technology,Mianyang 621010,China)
Abstract:A large number of frames damaged due to the poor lateral stiffness in Wenchuan Earthquake.Additonal flange wall could effectively improve the lateral stiffness.This paper analyzed the bearing capacity of special-shaped column of the practical engineering structures;meanwhile,it was obtained N-M curve and Mx-My curve of biaxial eccentricity compression based on numerical integration method.In addition,the Mx-My envelope diagram of an actual project was also calculated,which could provide a reference for section design and check.
Keywords:additional flange wall  biaxial eccentricity  bearing capacity of normal section  numerical integration
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号