| 树脂膜熔渗工艺浸渍过程的模拟与分析 |
| |
| 引用本文： | 梁滨,陈立新,赵慧欣,聂玉峰,李都宁.树脂膜熔渗工艺浸渍过程的模拟与分析[J].高分子材料科学与工程,2011(10):129-133. |
| |
| 作者姓名： | 梁滨 陈立新 赵慧欣 聂玉峰 李都宁 |
| |
| 作者单位： | 西北工业大学理学院应用化学系;西北工业大学理学院应用数学系; |
| |
| 摘 要： | 针对树脂膜熔渗(RFI)成型工艺过程中充模阶段树脂在预制件中的流动行为进行分析,根据牛顿流体在多孔介质中的渗流理论,在Darcy定律基础上使用有限元控制体技术建立二维等温流动控制方程,再对试验件进行几何建模和网格剖分,使用C++语言编写模拟成型工艺中树脂流动过程的程序。由计算实例可见,该方法能够很好地预测树脂浸渍过程中浸渍时间与预浸高度的关系,并确定流动前沿及模腔中的压力的变化规律。
|
| 关 键 词： | 树脂膜熔渗 数值模拟 浸渍 渗透率 黏度 |
Modeling and Analysis of the Impregnation Process During Resin Film Infusion Process |
| |
| Bin Liang,Lixin Chen,Huixin Zhao,Yufeng Nie,Duning Li.Modeling and Analysis of the Impregnation Process During Resin Film Infusion Process[J].Polymer Materials Science & Engineering,2011(10):129-133. |
| |
| Authors: | Bin Liang Lixin Chen Huixin Zhao Yufeng Nie Duning Li |
| |
| Affiliation: | Bin Liang1,Lixin Chen1,Huixin Zhao1,Yufeng Nie2,Duning Li2(1.Department of Applied Chemistry,School of Science,Northwestern PolytechnicalUniversity,2.Department of Applied Mathematics,NorthwesternPolytechnical University,Xi'an 710129,China) |
| |
| Abstract: | The flow behavior of molten resin in perform during impregnation process of resin film infusion(RFI) was studied.A two-dimensioned and isothermal governing equation for the flow was established based on Darcy's Law by means of finite element method.A geometric modeling method and mesh generation algorithm were then applied to programming a simulating software by C++,which could be used to simulate isothermal infiltration of a hot-melt resin into a complex shape textile perform.Results of the simulation will... |
| |
| Keywords: | resin film infusion numerical simulation impregnation permeability viscosity |
| 本文献已被 CNKI 等数据库收录！ |
|
