| Ti3SiC2/Cu复合材料的制备与性能 |
| |
| 引用本文： | 孙建军,周洋,路金蓉,李世波,黄振莺,翟洪祥.Ti3SiC2/Cu复合材料的制备与性能[J].粉末冶金材料科学与工程,2011,16(4):587-590. |
| |
| 作者姓名： | 孙建军 周洋 路金蓉 李世波 黄振莺 翟洪祥 |
| |
| 作者单位： | 北京交通大学机械与电子控制工程学院,北京,100044 |
| |
| 基金项目： | 国家自然科学基金资助项目(50672005) |
| |
| 摘 要： | 三元层状化合物Ti3SiC2兼具陶瓷和金属的性能,受到材料研究者的广泛关注.该文采用热压工艺制备Ti3SiC2/Cu复合材料,研究Ti3SiC2含量及烧结温度对复合材料密度、抗弯强度、弹性模量、电阻率等性能的影响.结果表明,复合材料的相对密度对其性能有着重要的影响.当Ti3SiC2的质量分数在60％～80％范围内,其它...
|
| 关 键 词： | Ti3SiC2 复合材料 热压法 性能 |
Preparation and properties of Ti_3SiC_2/Cu composites |
| |
| SUN Jian-jun,ZHOU Yang,LU Jin-rong,LI Shi-bo,HUANG Zhen-ying,ZHAI Hong-xiang.Preparation and properties of Ti_3SiC_2/Cu composites[J].materials science and engineering of powder metallurgy,2011,16(4):587-590. |
| |
| Authors: | SUN Jian-jun ZHOU Yang LU Jin-rong LI Shi-bo HUANG Zhen-ying ZHAI Hong-xiang |
| |
| Affiliation: | SUN Jian-jun,ZHOU Yang,LU Jin-rong,LI Shi-bo,HUANG Zhen-ying,ZHAI Hong-xiang(School of Mechanical & Electronic Control Engineering,Beijing Jiaotong University,Beijing 100044,China) |
| |
| Abstract: | The ternary layered compound Ti3SiC2,which combines both the merits of metals and ceramics,has attracted extensive attentions.Ti3SiC2/Cu composites were prepared by hot pressing method in the present study.The effects of Ti3SiC2 content and sintering temperature on density,flexural strength,elastic modulus and electric resistivity of the composites were investigated.The results demonstrate that the relative density of composites has strong effect on the properties of composites.When the mass fraction of Ti3... |
| |
| Keywords: | Ti3SiC2 composite hot pressing method properties |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
