首页 | 本学科首页   官方微博 | 高级检索  
     

水淬工艺对冷轧微合金双相钢力学性能的影响
引用本文:梁轩,李俊,彭颖红.水淬工艺对冷轧微合金双相钢力学性能的影响[J].钢铁研究学报,2008,20(9):46-0.
作者姓名:梁轩  李俊  彭颖红
作者单位:1. 上海交通大学机械与动力学院,上海,200240
2. 宝山钢铁股份有限公司冷轧厂,上海,200941
基金项目:国家重点基础研究发展计划(973计划)
摘    要: 研究了水淬工艺对微合金双相钢组织和力学性能的影响。结果表明,随着淬火温度的降低,双相钢的屈服和抗拉强度下降,同时总伸长率提高;不同的淬火温度使双相钢显微组织中不仅产生了不同体积分数的马氏体,而且也形成了不同数量的新生铁素体。TEM分析表明,新生铁素体中没有细小的NbCN粒子,因而避免了析出强化,这不仅可以改善铁素体的塑性从而有利于双相钢的塑性,而且也能够提高双相钢的强度。

关 键 词:水淬  双相钢  力学性能  显微组织
收稿时间:1900-01-01;

Effect of Water Quench Process on Mechanical Properties of Cold Rolled Dual Phase Steel Microalloyed With Niobium
LIANG Xuan,LI Jun,PENG Ying-hong.Effect of Water Quench Process on Mechanical Properties of Cold Rolled Dual Phase Steel Microalloyed With Niobium[J].Journal of Iron and Steel Research,2008,20(9):46-0.
Authors:LIANG Xuan  LI Jun  PENG Ying-hong
Affiliation:1. School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China; 2. Cold Rolling Mill, Baoshan Iron and Steel Co Ltd, Shanghai 200941, China
Abstract:Effect of water quench process on tensile properties of microalloyed dual phase (DP) steel was investigated. The results showed that the tensile strength and yield strength decrease while total elongation increases with decreasing quenching temperature. Different quenching temperatures lead to not only different amounts of martensite, but also different volume fractions of new ferrite. Due to exemption of precipitation strengthening, new ferrite will contribute to not only the increase of ductility, but also the improvement of microalloyed DP steel strength.
Keywords:water quench  dual phase steel  mechanical properties  microstructure  
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《钢铁研究学报》浏览原始摘要信息
点击此处可从《钢铁研究学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号