Modeling of gas leakage through compressor valves |
| |
Affiliation: | 1. Engineering Division, Campus Irapuato-Salamanca, University of Guanajuato, Salamanca, Guanajuato 36885, Mexico;2. Department of Mechanical Engineering and Construction, Campus de Riu Sec, University Jaume I, E-12071 Castellón, Spain;1. School of Energy and Power Engineering, Xi''an Jiaotong University, Xi''an 710049, China;2. Sustainable Buildings Research Centre, University of Wollongong, Wollongong, NSW 2500, Australia;3. School of Energy and Power Engineering, Zhengzhou University of Light Industry, Zhengzhou 450000, China |
| |
Abstract: | This paper describes a model developed to predict gas leakage in cases of incomplete sealing of the reed-type valves of small reciprocating compressors adopted for household refrigeration. The model assumes a one-dimensional formulation for the flow, considering the effects of viscous friction, slip-flow regime and compressibility. Reed bending into the port due to the pressure load is also taken into account to characterize the valve clearance. Computations are carried out during the compression cycle and the effect of leakage on both the isentropic and volumetric efficiencies is quantified for two operating conditions. It was found that leakage significantly reduces the compressor efficiency even for very small valve clearances and that leakage in the discharge valve is of greater importance than that in the suction valve. |
| |
Keywords: | Compressor Valve Leakage Modeling Compresseur Soupape Fuites Modélisation |
本文献已被 ScienceDirect 等数据库收录! |
|