| 基于模块入口出口地址的PC指针跑飞拦截技术 |
| |
| 引用本文： | 潘永雄,胡敏强,李小伟,胡菊芳. 基于模块入口出口地址的PC指针跑飞拦截技术[J]. 计算机应用与软件, 2009, 26(9): 177-179,182 |
| |
| 作者姓名： | 潘永雄 胡敏强 李小伟 胡菊芳 |
| |
| 作者单位： | 广东工业大学物理与光电工程学院,广东,广州,510006;新余高等专科学校机电与自动化工程系,江西,新余,338031 |
| |
| 摘 要： | 计算机控制系统软件可靠性设计是系统可靠性设计关键环节之一,是硬件系统可靠性设计的必要补充.在简要介绍PC指针"跑飞"成因及其后果基础上,分析了指令冗余、软件陷阱等传统软件可靠性设计方法的优缺点,提出了基于模块入口与出口地址的PC指针跑飞拦截技术,阐述了这一方式的拦截原理,给出了具体的实现方法及拦截效果实验数据.实践表明该拦截方式较彻底地解决了PC指针"跑飞"带来的计算机控制系统可靠性问题,从而进一步完善了计算机控制系统软件可靠性设计技术.
|
| 关 键 词： | 软件可靠性 PC跑飞 指令冗余 软件陷阱 拦截技术 |
INTERCEPTION TECHNOLOGY FOR PC MALFUNCTION BASED ON MODULE''S ENTRANCE AND EXIT ADDRESSES |
| |
| Pan Yongxiong,Hu Minqiang,Li Xiaowei,Hu Jufang. INTERCEPTION TECHNOLOGY FOR PC MALFUNCTION BASED ON MODULE''S ENTRANCE AND EXIT ADDRESSES[J]. Computer Applications and Software, 2009, 26(9): 177-179,182 |
| |
| Authors: | Pan Yongxiong Hu Minqiang Li Xiaowei Hu Jufang |
| |
| Affiliation: | Faculty of Physics and Optoelectronic Engineering;Guangdong University of Technology;Guangzhou 510006;Guangdong;China;Faculty of Automation;Xinyu College;Xinyu 338031;Jiangxi;China |
| |
| Abstract: | The software reliability design of MCU control system is one of the keys in system reliability design,and is also an important supplement to the hardware reliability design.In the paper it describes the reason and consequence of PC(Programming Counter) malfunction briefly,and analyzes the advantage and disadvantage of the traditional reliability design method such as instruction redundancy,software trap,etc.,then proposes the interception technology for the PC malfunction based on module's entrance and exit... |
| |
| Keywords: | Software reliability PC malfunction Software trap Instruction redundancy Interception technology |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
