| 冰箱发泡胎具合模机构改进 |
| |
| 引用本文： | 薛洪波,闫观海,张德海,刘琴华.冰箱发泡胎具合模机构改进[J].河南机电高等专科学校学报,2002,10(4):30-31. |
| |
| 作者姓名： | 薛洪波 闫观海 张德海 刘琴华 |
| |
| 作者单位： | 河南新飞电器有限公司,河南,新乡,453002 |
| |
| 摘 要： | 由于冰箱发泡胎具合模结构不稳定，造成冰箱尺寸不稳定，重新对合模机构进行改进，确保发泡箱胎的合模高度稳定，保证冰箱箱体质量。
|
| 关 键 词： | 冰箱 发泡胎具 合模机构 合模高度 锁紧杆 撑涨力 |
| 文章编号： | 1008-2093(2002)04-0030-02 |
| 修稿时间： | 2002年5月9日 |
Improving the foaming mould machine tructure of refrigerators |
| |
| XUE Hong bo,et al.Improving the foaming mould machine tructure of refrigerators[J].Journal of Henan Mechanical and Electrical Engineering College,2002,10(4):30-31. |
| |
| Authors: | XUE Hong bo |
| |
| Abstract: | Because the foaming mould machine for refrigerators is out of order,it the dimension of refrigerators does mot satisfy the demand. Through improving the foaming mould machine structure , it can ensure the mould machine run normally, so that it can ensure the quality of the refrigerators. |
| |
| Keywords: | control height lock bar expansive force |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
