塑管支架注射模设计

通过对塑料支架塑件结构的分析,介绍了该塑件注射模的成型工艺过程,提出了模具采用塑件侧面作为分型面的方案,使模具在采用斜导柱侧向抽芯机构脱模时,其结构简单实用,易于加工调试,解决了注射成型后塑件的脱模的问题。经大批量的生产检验,该模具结构合理,生产效率高,塑件质量好。

Design of the Injection Mold for Plastic Pipe Bracket

Based on the analysis of structure of product of plastic bracket, introduced the injection mold of the molding process, put forward by product as mold side parting surface scheme, the die in the inclined guide pillar side pulling-core mechanism of stripping, the structure is simple and practical, easy processing and debugging, solved after injection molding product release problemo The products in large quantities of production test, the die structure is reasonable, high production efficiency, good product quality.