首页 | 本学科首页   官方微博 | 高级检索  
     

云浮天然黄铁矿粉的深加工和表征
引用本文:周慧明,王大刚,范力仁.云浮天然黄铁矿粉的深加工和表征[J].广东化工,2012,39(2):65-67.
作者姓名:周慧明  王大刚  范力仁
作者单位:1. 广东云浮云开粉体有限公司,广东云浮,527343
2. 教育部纳米矿物材料及应用工程研究中心中国地质大学,湖北武汉,430074
摘    要:采用重选和反浮选相结合的方法对广东云浮天然黄铁矿进行提纯,经气流粉碎后获得平均粒径为13μm、T Fe和S含量分别为45.30wt%、50.95 wt%的黄铁矿超微细粉体,采用XRD、EDS、XPS以及TG对黄铁矿超微细粉体进行了表征。XRD与EDS分析结果表明黄铁矿超微细粉体的主要物相为黄铁矿FeS2,粉体颗粒呈不规则形状;TG结果表明黄铁矿超微细粉体在440℃前具有较好的热稳定性,XPS分析表明黄铁矿超微细粉体表面Fe以Fe3+形式存在,S主要以SO42-形式存在。

关 键 词:天然黄铁矿  深加工  超微细粉体  表征  正极材料

Intensive Processing and Characterization of Natural Pyrite Powder from Yunfu
Zhou Huiming,Wang Dagang,Fan Liren.Intensive Processing and Characterization of Natural Pyrite Powder from Yunfu[J].Guangdong Chemical Industry,2012,39(2):65-67.
Authors:Zhou Huiming  Wang Dagang  Fan Liren
Affiliation:1.Co.,Ltd.,of Yunkai Powder in Guangdong Yunfu,Yunfu 527343; 2.Engineering Research Center and Application of Nano-Geomaterials of Ministry of Education (China University of Geosciences),Wuhan 430074,China)
Abstract:In the work,natural pyrite samples from Yunfu were employed as the source materials,and ultrafine pyrite powder was prepared via deep processing including reelection,reverse floation and airflow grind,which the concentrations of T Fe and S were 45.30 wt%,50.95 wt% respectively and the average grain size was 13 μm.The ultrafine pyrite powder was characterized by X-ray diffraction(XRD),Energy dispersive spectroscopy(EDS),Thermo-gravimetric analysis(TG) and X-ray photoelectron spectroscopy(XPS).XRD and EDS demonstrate the phase of ultrafine pyrite powder is mostly pyrite FeS2.TG shows ultrafine pyrite powder has excellent thermo-stability under 440 ℃.XPS represents that Fe and S on the ultrafine pyrite powder surface exist in the form of Fe3+ and SO42-,respectively.
Keywords:natural pyrite  intensive processing  ultrafine powder  characterization  cathode materials
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号