首页 | 本学科首页   官方微博 | 高级检索  
     

基于直流母线电流极性平均值的负载串联谐振逆变器谐振频率跟踪方法
引用本文:李宏,王崇武,焦振宏. 基于直流母线电流极性平均值的负载串联谐振逆变器谐振频率跟踪方法[J]. 西北工业大学学报, 2010, 28(1)
作者姓名:李宏  王崇武  焦振宏
作者单位:西北工业大学,航海学院,陕西,西安,710072
摘    要:负载串联谐振逆变器,当负载参数变化时必须同步改变逆变器工作频率以适应负载变化来获得最大输出功率。通常采用锁相环技术完成谐振频率跟踪,需要同时测量逆变器输出电压和负载电流,电压、电流测量延迟时间的差异会造成频率跟踪误差。为了消除频率跟踪误差,文中提出了基于直流母线电流极性平均值的负载串联谐振式逆变器谐振频率跟踪方法。论文分析了逆变器直流母线电流极性信号平均值u与逆变器工作频率f及电路参数(L、C、R)关系,由于u反映了电路参数和逆变器工作频率变化,u最大值U对应于谐振频率,所以用U作为参考信号,u作为反馈信号,构成闭环谐振频率跟踪控制系统,通过比较u的变化情况,确定频率的增减,给出了频率跟踪流程,仿真和实验结果表明该方法能够很好地实现负载串联谐振逆变器的谐振频率跟踪。

关 键 词:控制  算法  负载串联谐振逆变器  频率跟踪  直流母线电流极性平均值

Minimizing Error of Frequency Tracking in Series Load Resonant Inverter Using Mean Value of DC Bus Current Polarity
Li Hong,Wang Chongwu,Jiao Zhenhong. Minimizing Error of Frequency Tracking in Series Load Resonant Inverter Using Mean Value of DC Bus Current Polarity[J]. Journal of Northwestern Polytechnical University, 2010, 28(1)
Authors:Li Hong  Wang Chongwu  Jiao Zhenhong
Abstract:Section 1 of the full paper briefs the analysis of DC bus current of series load resonant inverter.Section 2 explains the minimization method in some detail;its core consists of:(1) we analyze the relationship among the mean value of DC bus current polarity,load parameters [resistance(R),inductance(L),capacity(C)],and the working frequency as shown in eq.(11) and Figs.4 and 5;(2) as the mean value reflects the changes in R,L,C and the working frequency and as the maximum value corresponds to the resonant fr...
Keywords:control  algorithms  series load resonant inverter  frequency tracking  mean value of DC bus current polarity
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号