首页 | 本学科首页   官方微博 | 高级检索  
     

基于DDS的电子标签检测扫频信号源
引用本文:陈伟,杨成忠,吴炎彪.基于DDS的电子标签检测扫频信号源[J].机电工程,2010,27(3):100-102,106.
作者姓名:陈伟  杨成忠  吴炎彪
作者单位:杭州电子科技大学,自动化学院,浙江,杭州,310018
摘    要:为了实现电子标签检测系统扫频信号源的设计,采用了直接数字频率合成技术(DDS),并根据检测系统的需求,选取了DDS芯片AD9830作为频率合成器件,辅助以高频功率放大电路,实现了主体硬件电路设计;通过软件的方式获得了以检测标签谐振频率为中心的2 MHz带宽、扫频时间可控的扫频信号源。研究结果表明,DDS频率合成技术,能较好地实现精度高、转换时间快的电子标签检测扫频信号源。

关 键 词:直接数字频率合成技术  扫频信号源  AD9830

Swept signal source of FRID detection systems based on DDS
CHEN Wei,YANG Cheng-zhong,WU Yan-biao.Swept signal source of FRID detection systems based on DDS[J].Mechanical & Electrical Engineering Magazine,2010,27(3):100-102,106.
Authors:CHEN Wei  YANG Cheng-zhong  WU Yan-biao
Affiliation:School of Automation;Hangzhou Dianzi University;Hangzhou 310018;China
Abstract:Aiming at realizing swept signal source of radio frequency identification(FRID) detection systems,the DDS direct digital synthesis technology was used,and in accordance with FRID detection systems,DDS chip AD9830 was selected as the frequency synthesizer device.The main hardware circuit was developed and supported by high-frequency power amplifier circuit.And then the needed swept signal source was implemented by software,which the center of 2 MHz bandwidth is the resonant frequency of the tag and the sweep...
Keywords:AD9830
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号