Microstructure,oxidation and thermal shock resistance of graphene reinforced SiBCN ceramics |
| |
Affiliation: | 1. Institute for Advanced Ceramics, School of Materials Science and Engineering, Harbin Institute of Technology, Heilong Jiang, Harbin 150080, China, China;2. State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Heilong Jiang, Harbin 150001, China, China;1. IEM (Institut Europeen des Membranes), UMR 5635 (CNRS-ENSCM-UM2), Universite Montpellier 2, Place E. Bataillon, F-34095 Montpellier, France;2. Science des Procédés Céramiques et de Traitements de Surface (SPCTS), UMR CNRS 7315, Centre Européen de la Céramique, 12 rue Atlantis, 87068 Limoges Cedex, France;1. Institute for Advanced Ceramics, School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150080, China;2. State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China;1. State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Heilong Jiang, Harbin 150001, China;2. Institute for Advanced Ceramics, School of Materials Science and Engineering, Harbin Institute of Technology, Heilong Jiang, Harbin 150080, China;3. State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China;4. Beijing Institute of Control Engineering, Beijing 100094, China |
| |
Abstract: | SiBCN ceramics were prepared using various volumes of graphene platelets (GPLs) as nanofiller. The effects of the nanofiller on microstructure, and oxidation and thermal shock resistance of as-sintered ceramics were investigated. The phase composition and microstructures were very similar for all investigated ceramics consisting primarily of β-SiC, BNC and small amounts of α-SiC with relatively homogeneously distributed 5–10 nm thick GPLs in the matrix. For SiBCN ceramics incorporating graphene as nanofiller, a porous oxide layer forms at 1500 °C and the oxidation behavior shows a linear kinetics by thickness measurement method. Gas evolution during heating lead to a passive oxidation behavior and weight loss. Graphene reinforced SiBCN ceramics exhibit thermal shock resistance superior to monoliths of the same material. The graphene distributed in SiBCN matrix can dissipate the energy of crack growth and acts as a stopper to cracks. The toughening mechanisms offered by graphene, including pull-out and bridging appear to aid in ameliorating thermal shock effects. Furthermore, the existence of a dense oxide surface layer retards oxygen diffusion into the inner matrix and heals surface pores and cracks, which also contributes to thermal shock resistance. |
| |
Keywords: | C. Thermal shock resistance SiBCN Microstructure Oxidation resistance Graphene |
本文献已被 ScienceDirect 等数据库收录! |
|