首页 | 本学科首页   官方微博 | 高级检索  
     

Q235表面预处理中温渗碳特性
引用本文:杨智兵,邱长军,孙毅.Q235表面预处理中温渗碳特性[J].材料开发与应用,2008,23(1):35-37.
作者姓名:杨智兵  邱长军  孙毅
作者单位:南华大学机械工程学院,湖南,衡阳,421001;南华大学机械工程学院,湖南,衡阳,421001;南华大学机械工程学院,湖南,衡阳,421001
基金项目:湖南省自然科学基金 , 湖南省教育厅青年基金
摘    要:将Q235表面脱碳处理后,进行氧化还原处理,对其表面进行SEM观测,在处理试样的表面出现亚微米晶粒及在晶粒中存在纳米层状结构。在滴注式渗碳炉中,在750℃温度中进行不同时长的渗碳,升温至900℃保温5 min后淬火。测量显微硬度,用SEM、金相显微镜进行组织观察,测量渗碳厚度。结果表明,表面预处理对渗碳有明显的加速作用。

关 键 词:气体渗碳  亚微米  氧化-还原  预处理
文章编号:1003-1545(2008)01-0035-03
修稿时间:2007年8月15日

Carburizing Behavior of Q235 Iron Pretreated at Moderate Temperature
YANG Zhi-bing,QIU Chang-jun,Sun Yi.Carburizing Behavior of Q235 Iron Pretreated at Moderate Temperature[J].Development and Application of Materials,2008,23(1):35-37.
Authors:YANG Zhi-bing  QIU Chang-jun  Sun Yi
Abstract:The surface of Q235 iron with decarbonization treatment,and then oxidation-reduction pre-treatment is observed under SEM.It is exhibited that submicron crystal exists on the pre-treatment iron surface and the nanometer layer structure in the submicron crystal.After carburizing at 750℃ for different time in drop-feeding atmosphere carburizing furnace,rising temperature to 900℃ and keep 5 minutes then quencher,the micro-penetration hardness is detected,the microstru-cture is obsered under SEM & OM and the thickness of carburizing layer is measured.Results show,that the pre-treatment of surface accelerate the carburize process obviously.
Keywords:Gas carburization  Submicron  Oxidation-reduction  Pre-treatment
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号