| 有源安装板振动试验研究 |
| |
| 引用本文： | 王梅,张姗姗.有源安装板振动试验研究[J].电子科技,2013,26(11):129-131. |
| |
| 作者姓名： | 王梅 张姗姗 |
| |
| 作者单位： | (1.中国电子科技集团公司第38研究所 工程技术部,安徽 合肥 230031;2.合肥工业大学 机械与汽车工程学院,安徽 合肥 230009) |
| |
| 基金项目： | 安徽省科技计划基金资助项目（10020203066） |
| |
| 摘 要： | 工作中的有源安装板处于振动状态,剧烈的振动会导致有源安装板结构的破坏,缩短有源安装板使用寿命,因此对有源安装板进行振动试验研究具有重要意义。文中针对某雷达有源安装板进行了振动试验,得到了X、Y、Z这3方向第一次与最后一次试验后的特征级曲线对比图,并最终分析了试验结果,且对有源安装板的结构设计进行了评估试验。
|
| 关 键 词： | 振动试验 有源安装板 特征级 结构设计 |
Study on Vibration Experiment of Active Mounting Plate |
| |
| WANG Mei,ZHANG Shanshan.Study on Vibration Experiment of Active Mounting Plate[J].Electronic Science and Technology,2013,26(11):129-131. |
| |
| Authors: | WANG Mei ZHANG Shanshan |
| |
| Affiliation: | (1.Engineering Department,No.38 Research Institute,China Electronic Technology Group Corporation,Hefei 230031,China;2.School of Mechanical and Automotive Engineering,Hefei University of Technology,Hefei 230009,China) |
| |
| Abstract: | Active mounting plate is in the state of vibration when it is working. Violent vibration would cause structure damage of active mounting plate and shorten its service life. So it is important to conduct vibration test on active mounting plate. Test method is designed in this paper and the vibration experiment is done of a certain type of radar active mounting plate. The comparison charts of feature level curves in the directions of X, Y, Z between the first and last test are given. Test results are analyzed and the structure design of the active mounting plate is evaluated. |
| |
| Keywords: | vibration test active mounting plate feature level structure design evaluate |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《电子科技》浏览原始摘要信息 |
|
点击此处可从《电子科技》下载全文 |
|
