首页 | 本学科首页   官方微博 | 高级检索  
     

棉/丙纶针织增强复合材料的力学性能研究
引用本文:林浩,付世盼,刘冲,胡洪刚.棉/丙纶针织增强复合材料的力学性能研究[J].现代纺织技术,2011,19(6).
作者姓名:林浩  付世盼  刘冲  胡洪刚
作者单位:1. 西安工程大学纺织与材料学院,西安,710048
2. 武汉衣翎针织有限责任公司,武汉,430056
摘    要:选用29tex棉纱和33tex丙纶,采用添纱组织的生产工艺,编织罗纹空气层和罗纹半空气层组织,并对这两种组织的力学性能进行研究。将制得的织物试样经过热压法处理,制得棉纱针织布增强聚丙烯复合材料,并对其力学性能进行研究。结果显示:在热压温度180-200℃,压强7.5MPa时制得的棉纱针织布增强聚丙烯复合材料比常用的麻/丙纶增强复合材料的力学性能更优良。

关 键 词:棉/丙纶针织物  复合材料  热压法  力学性能

The Research on the Mechanical Properties of Knitted Strengthen Composite Materials for Cotton and Polypropylene
LIN Hao,FU Shipan,LIU Chong,HU Honggang.The Research on the Mechanical Properties of Knitted Strengthen Composite Materials for Cotton and Polypropylene[J].Advanced Textile Technology,2011,19(6).
Authors:LIN Hao  FU Shipan  LIU Chong  HU Honggang
Affiliation:LIN Hao1,FU Shipan2,LIU Chong2,HU Honggang2 (1.Faculty of Textile and Material,Xi'an Polytechnic University,Xi'an 710048 China,2.Wuhan Yiling Knitting Co.,LTO,Wuhan 430056,China)
Abstract:In this research two kinds of knitting fabrics made from 29tex cotton yarn and 33tex PP yarn were developed and knitted using milano rib stitch and half-milano rib stitch and by using the plating stitch production technology. After the knitted samples were treated using hot pressing method, the new composite materials were won using the cotton as base and polypropylene as intensifier. By researching the Mechanical Properties of the new composite materials, the final conclusion is when the hot pressure is 7.5MPa and temperature between 180 ℃ -200 ℃ the composite material's mechanical Properties are better than the composites material that was reinforced by using hemp / polypropylene fiber.
Keywords:cotton/polypropylene knitted fiber  composite materials  hot processing  mechanical properties
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号