Effects of sensor locations on air-coupled surface wave transmission measurements across a surface-breaking crack |
| |
Authors: | Kee Seong-Hoon Zhu Jinying |
| |
Affiliation: | Department of Civil, Architectural, and Environmental Engineering, the University of Texas, Austin, TX, USA. |
| |
Abstract: | Previous studies show that the surface wave transmission (SWT) method is effective to determine the depth of a surface-breaking crack in solid materials. However, nearfield wave scattering caused by the crack affects the reliability and consistency of surface wave transmission measurements. Prior studies on near-field scattering have focused on the case where crack depth h is greater than wavelength λ of surface waves (i.e., h/λ > 1). Near-field scattering of surface waves remains not completely understood in the range of h/λ for the SWT method (i.e., 0 ≤ h/λ ≤ 1/3), where the transmission coefficient is sensitive to crack depth change and monotonically decreases with increasing h/λ. In this study, the authors thoroughly investigated the near-field scattering of surface waves caused by a surface-breaking crack using experimental tests and numerical simulations for 0 ≤ h/λ ≤ 1/3. First, the effects of sensor locations on surface wave transmission coefficients across a surface-breaking crack are studied experimentally. Data are collected from Plexiglas and concrete specimens using air-coupled sensors. As a result, the variation of transmission coefficients is expressed in terms of the normalized crack depth (h/λ) as well as the normalized sensor location (x/λ). The validity of finite element models is also verified by comparing experimental results with numerical simulations (finite element method). Second, a series of parametric studies is performed using the verified finite element model to obtain more complete understanding of near-field scattering of surface waves propagating in various solid materials with different mechanical properties and geometric conditions. Finally, a guideline for selecting appropriate sensor arrangements to reliably obtain the crack depth using the SWT method is suggested. |
| |
Keywords: | |
本文献已被 PubMed 等数据库收录! |
|