Characterization of PV array output using a small number of measured parameters

The purpose of the present study was to develop a sufficiently good fit for the measured I–V curve of a PV module and array using only three easily measurable parameters: —the open-circuit voltage (V_oc); —the short-circuit current (I_sc); —the maximum power (P_m). With an additional three parameters ( ; ; ) it is possible to describe any I–V curve, taking into account cell temperature T and solar radiation Q. This method has been tested on various solar array panels as well as on a single 10 cm dia. solar cell. The difference between the real curve and the proposed fit was found to be less than 3 percent for a fixed temperature and radiation and about 6 percent for various combinations of temperature and radiation.