首页 | 本学科首页   官方微博 | 高级检索  
     

基于锁相红外热成像理论的复合材料网格加筋结构的无损检测
引用本文:赵延广,郭杏林,任明法.基于锁相红外热成像理论的复合材料网格加筋结构的无损检测[J].复合材料学报,2011,28(1):199-205.
作者姓名:赵延广  郭杏林  任明法
作者单位:大连理工大学 工业装备分析国家重点实验室, 大连 116024
基金项目:国家自然科学基金(10702012); 辽宁省博士科研启动基金(20071093); 工业装备结构分析国家重点实验室专项经费(S08207)
摘    要:基于锁相红外热成像理论, 对复合材料网格加筋结构的几类典型缺陷进行无损检测, 采用法国Cedip公司开发的锁相红外热成像系统对检测结果进行分析。讨论了加载频率、 输出电压偏移量对检测的影响。结果表明, 相位图比幅值图含有更多的缺陷信息。不同的加载频率会产生不同的检测结果, 选择恰当的加载频率是检测的关键; 增加输出电压偏移量有利于检测。该方法可用于对复合材料未知缺陷的检测。 

关 键 词:复合材料    网格结构    无损检测    红外热像法    锁相热像法
收稿时间:2010-01-07
修稿时间:2010-03-16

Lock-in thermography method for the NDT of composite grid stiffened structures
ZHAU Yanguang,GUO Xinglin,REN Mingfa.Lock-in thermography method for the NDT of composite grid stiffened structures[J].Acta Materiae Compositae Sinica,2011,28(1):199-205.
Authors:ZHAU Yanguang  GUO Xinglin  REN Mingfa
Affiliation:State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, China
Abstract:Based on infrared lock-in thermography technology,the nondestructive testing of composite grid stiffened structures with typical defects was carried out.The result was also analyzed using infrared lock-in thermography system developed by Cedip in France.The effects of loading frequency and output voltage offset to the testing result were discussed.The result shows that there are more information of phase figures than that of amplitude figures.Different frequencies will lead to different results and the load...
Keywords:composite  grid structure  NDT  infrared thermography  lock-in thermography  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《复合材料学报》浏览原始摘要信息
点击此处可从《复合材料学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号