| Abstract: | The solid surface tension γsv of hydrophobic polymer powders has been determined using the capillary penetration technique. By plotting Kγlv cos ζ, where K is a geometric factor, versus the liquid surface tension γlv, the following values of γsv were directly derived from the curves: poly(tetrafluoroethylene) γsv = 20.4 mJ/m2, polypropylene γsv = 30.2 mJ/m2, polyethylene γsv = 34.4 mJ/m2, and polystyrene γsv = 27.5 mJ/m2. These values are in good agreement with the γsv values obtained from contact angle measurements on flat and smooth solid surfaces of the same materials. If the contact angles were first calculated from the capillary penetration experiments, which is the usual procedure applied in the literature, distinctly higher contact angles were obtained. Obviously these angles are affected by the powder morphology and are therefore meaningless contact angles in terms of a surface energetic interpretation. |
