| Abstract: | Gel-spun ultra-high molecular weight polyethylene (UHMWPE) fibers have superior properties but their use in composite material applications is limited by their poor adhesion to polymer matrices. Previous studies have shown that etching improves the adhesion of epoxy to the fibers, but leads to a reduction in mechanical properties. The purpose of this research was to use uniaxially drawn gel-cast UHMWPE films as a model system since both films and fibers have a highly oriented fibrillar structural hierarchy. Etching has detrimental effects on the mechanical properties and crystallinity of these very thin films. The small amount of carbonyl and carboxyl groups added to the surface through etching raises the film's surface tension and enhances wetting by epoxy. Even though the unmodified film cannot be bonded with epoxy, the interlaminar shear strength between epoxy and the etched films approaches the cohesive strength of the epoxy. A combination of interfacial and UHMWPE cohesive failures is observed. The increase in adhesion is attributed to the slight increase in surface oxygen. |
