| Abstract: | Polypropylene (PP), low-density polyethylene (LDPE), and high-density polyethylene (HDPE) sheets were surface-modified by radio-frequency ammonia plasmas in order to improve the strength and durability of adhesive bonding, particularly under hot and humid conditions. Surface analyses by contact angle measurements, XPS (X-ray photoelectron spectroscopy), and FTIR-ATR (Fourier transform infraredattennuated total reflection) showed incorporation, upon plasma treatment, of both nitrogen- and oxygen-containing functional groups on the polyolefin surfaces, with similar surface compositions on modified LDPE and PP. Plasma-treated polyolefin samples bonded with a cyanoacrylate adhesive possessed a high shear bond strength in 'dry' conditions. On exposure to hot and humid conditions (immersion in 60°C water), the bond strength decreased with time in some cases while for other samples the lap shear strength was the same after exposure to the humid environment for 1 month compared with that under 'dry' conditions. Ammonia-plasma-treated HDPE specimens displayed the best strength retention upon water immersion. The excellent durability of the bond strength under humid conditions is indicative of covalent bonding between the cyanoacrylate adhesive and amine groups, which unlike physical bonding (e.g. van der Waals interactions) is not disrupted by the ingress of water molecules. It is also possible that the structure of the interphase is in the form of an interpenetrating network, obtained through penetration of the adhesive into the plasma-modified laycr, followed by covalent bonding and curing of the penetrated adhesive. |
