| 多工况下针梁钢模台车弧形模板有限元分析 |
| |
| 引用本文： | 万刚,廖湘辉,刘欢,余健,刘宏彬.多工况下针梁钢模台车弧形模板有限元分析[J].机械设计与制造,2011(8). |
| |
| 作者姓名： | 万刚 廖湘辉 刘欢 余健 刘宏彬 |
| |
| 作者单位： | 1. 三峡大学机械与材料学院,宜昌,443002
2. 新疆石油工程建设有限责任公司,克拉玛依,834000 |
| |
| 基金项目： | 三峡地下电站引水上弯段混凝土衬砌钢模台车(GXW/2008-08-02A) |
| |
| 摘 要： | 对三峡工程地下电厂引水隧洞施工方案中的针梁钢模台车的弧形模板分为多种工况进行了有限元分析。分析了其结构特点,并建立了Proe三维模型。提出了六种工作工况,并对每种工况进行了受力分析,得出了各种工况的受力情况,并利用ANSYS有限元分析软件对其弧形模板的强度和刚度进行了校核,在此基础之上提出了弧形模板设计方案的优化方案,并对其进行了验证。优化方案与原方案相比减小了模板重量的22.97%,节约了成本。其刚度和强度都满足工作要求,此结构梁、杆件的布置符合应力的分布趋势。为钢模台车的模板设计提供了参考。
|
| 关 键 词： | ANSYS 钢模台车 弧形模板 多工况 有限元 |
Finite element analysis on the arc steel mold of needle beam steel mold trolley structure based on multiple loading conditions |
| |
| WAN Gang,LIAO Xiang-hui,LIU Huan,YU Jian,LIU Hong-bin.Finite element analysis on the arc steel mold of needle beam steel mold trolley structure based on multiple loading conditions[J].Machinery Design & Manufacture,2011(8). |
| |
| Authors: | WAN Gang LIAO Xiang-hui LIU Huan YU Jian LIU Hong-bin |
| |
| Affiliation: | WAN Gang1,LIAO Xiang-hui1,LIU Huan1,YU Jian1,LIU Hong-bin2(1College of Mechanical & Material Engineering,China Three Gorges University,Yichang 443002,China)(2Xinjiang Petroleum Construction Company,Karamay 834000,China) |
| |
| Abstract: | It studies the arc steel mold of needle beam steel trolley in the diversion tunnel construction of SanXia underground power station based on multiple loading conditions by applying FEM,and a three-dimensional model is established after analyzing the structural characteristics.Then six loading conditions are put forward and the force analysis for each case is carried out and the forces are obtained.Meanwhile the intensity and the stiffness of the mold are verified with ANSYS software.Based on which an optima... |
| |
| Keywords: | ANSYS Steel mold trolley Arc steel mold Multiple loading conditions Finite element |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
