| 基于UG的汽车覆盖件刚度仪设计与研究 |
| |
| 引用本文： | 张晓辉,邢忠文,韩秀琴. 基于UG的汽车覆盖件刚度仪设计与研究[J]. 机械设计与制造, 2011, 0(7) |
| |
| 作者姓名： | 张晓辉 邢忠文 韩秀琴 |
| |
| 作者单位： | 1. 黑龙江东方学院,机电工程学部,哈尔滨,150086
2. 哈尔滨工业大学,工程训练中心,哈尔滨,150001 |
| |
| 基金项目： | 2010年黑龙江省教育厅科学技术研究项目资助(11553070) |
| |
| 摘 要： | 介绍了虚拟装配技术的设计思想,研究了在UG环境下,自顶向下虚拟装配技术,并以5自由度汽车覆盖件刚度仪虚拟设计为例介绍了UG中自顶向下装配设计的具体方法,生成二维工程图,并列出与传统设计方法比较的图表。将UG虚拟样机技术应用于汽车覆盖件刚度仪设计,不仅实现了刚度仪的三维实体建模,还实现了刚度仪虚拟装配及运动仿真,有利于刚度仪快速设计与优化,提高工作效率,并可以更加直接、准确地实现设计者的意图,大大缩短新产品设计开发周期。
|
| 关 键 词： | UG 刚度仪 虚拟装配 设计与研究 |
Design and research for automotive panel stiffness instrument based on UG |
| |
| ZHANG Xiao-hui,XING Zhong-wen,HAN Xiu-qin. Design and research for automotive panel stiffness instrument based on UG[J]. Machinery Design & Manufacture, 2011, 0(7) |
| |
| Authors: | ZHANG Xiao-hui XING Zhong-wen HAN Xiu-qin |
| |
| Affiliation: | ZHANG Xiao-hui1,XING Zhong-wen2,HAN Xiu-qin2(1Department of Mechatronics Engineering,Heilongjiang Institute of Eastern,Haerbin 150086,China)(2The Engineering Training Center,Harbin Institute of Technology,Harbin 150001,China) |
| |
| Abstract: | Design ideas of virtual assembly is introduced and top-down technologies of virtual assembly is researched under UG by taking automobile panels rigidity instrument of 5 degrees-of-freedom virtual assembly as an example,and the specific assemble method from top-down is introduced in UG,then two dimensional drawings are generated,and graph comparing with the tradition design method is listed.UG virtual sample technology will be applied in design of automotive panel stiffness instrument,not only three dimensio... |
| |
| Keywords: | UG Stiffness instrument Virtual assembly Design and research |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
