Phosphate removal from wastewater using red mud |
| |
Authors: | Huang Weiwei Wang Shaobin Zhu Zhonghua Li Li Yao Xiangdong Rudolph Victor Haghseresht Fouad |
| |
Affiliation: | ARC Centre of Excellence for Functional Nanomaterials and Division of Chemical Engineering, The University of Queensland, St Lucia, QLD 4072, Australia. |
| |
Abstract: | Red mud, a waste residue of alumina refinery, has been used to develop effective adsorbents to remove phosphate from aqueous solution. Acid and acid-thermal treatments were employed to treat the raw red mud. The effects of different treatment methods, pH of solution and operating temperature on adsorption have been examined in batch experiments. It was found that all activated red mud samples show higher surface area and total pore volume as well as higher adsorption capacity for phosphate removal. The red mud with HCl treatment shows the highest adsorption capacity among all the red mud samples, giving adsorption capacity of 0.58 mg P/g at pH 5.5 and 40 degrees C. The adsorption capacity of the red mud adsorbents decreases with increase of pH. At pH 2, the red mud with HCl treatment exhibits adsorption of 0.8 mg P/g while the adsorption can be lowered to 0.05 mg P/g at pH 10. However, the adsorption is improved at higher temperature by increasing 25% from 30 to 40 degrees C. The kinetic studies of phosphate adsorption onto red mud indicate that the adsorption mainly follows the parallel first-order kinetics due to the presence of two acidic phosphorus species, H(2)PO(4)(-) and HPO(4)(2-). An analysis of the adsorption data indicates that the Freundlich isotherm provides a better fitting than the Langmuir model. |
| |
Keywords: | Red mud Phosphorus removal Acid treatment Acid-heat treatment Kinetics Isotherm |
本文献已被 ScienceDirect PubMed 等数据库收录! |
|