首页 | 本学科首页   官方微博 | 高级检索  
     

烧熔陶瓷结合剂刚玉磨具显微结构研究
引用本文:闫国进,栗政新,荆运洁. 烧熔陶瓷结合剂刚玉磨具显微结构研究[J]. 金刚石与磨料磨具工程, 2011, 31(4): 50-53. DOI: 10.3969/j.issn.1006-852X.2011.04.011
作者姓名:闫国进  栗政新  荆运洁
作者单位:河南工业大学材料学院,郑州,450007
基金项目:河南工业大学校科研基金资助项目,项目编号:09XJC021
摘    要:本文通过电子探针微区分析(EPMA)研究了黏土-长石-硼玻璃系烧熔结合剂刚玉陶瓷磨具的显微结构,分析了磨料中的杂质特征,并对磨料与结合剂之间的反应特点进行了研究.研究表明:烧熔结合剂呈基本均匀的玻璃状态,结合剂与磨料在界面上结合紧密.棕刚玉磨料中的杂质有TiO2、ZrO2、Fe2O3、MgO、Na2O、K2O等,并以T...

关 键 词:陶瓷磨具  烧熔结合剂  显微结构  杂质  刚玉

Research on microstructures of molten vitrified bond corundum grinding wheel
Yan Guojin,Li Zhengxin,Jing Yunjie. Research on microstructures of molten vitrified bond corundum grinding wheel[J]. Diamond & Abrasives Engineering, 2011, 31(4): 50-53. DOI: 10.3969/j.issn.1006-852X.2011.04.011
Authors:Yan Guojin  Li Zhengxin  Jing Yunjie
Affiliation:Yan Guojin Li Zhengxin Jing Yunjie(School of Material Science and Engineering,Henan University of Technology,Zhengzhou 450007,China)
Abstract:Microstructures of molten vitrified bond have an important effect on the behaviour of the corundum grinding wheel.The authors studied the microstructures of the molten vitrified bond corundum grinding wheel,as well as the impurities in the abrasive grains.The reaction characteristics between the abrasive grains and the bond was revealed by electronic probe micro area analysis(EPMA).The results showed that the molten bond was in a glassy state,the bond-bridge and the abrasive grains were bonded well.The impu...
Keywords:vitrified grinding wheel  molten bond  microstructure  impurity  corundum  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号