Fault location method applied to transmission lines of general configuration |
| |
| Affiliation: | 1. Dept. of Electrical Engineering, University of Brasilia (UnB), Brasilia, Brazil;2. Automation and Simulation Laboratory of Electrical Systems (LASSE), Itaipu Technological Park Foundation (FPTI), Foz do Iguacu, Brazil;1. Elect. Eng. Dept., Mansoura University, Mansoura 35516, Egypt;2. Institute of Energy, Peter the Great St. Petersburg Polytechnic University, St. Petersburg 195251, Russia;3. Elect. Eng. Dept., Al-balqa Applied University, Amman 11134, Jordan;1. Signals and Systems Laboratory,Institute of Electrical and Electronic Engineering, University M’Hamed Bougara of Boumerdes, Avenue of independence, Boumerdes 35000, Algeria;2. Power Electronics and Renewable Energy Research Laboratory (PEARL), University of Malaya, Kuala Lumpur 50603, Malaysia |
| |
| Abstract: | Power quality is an important concern once automation is present in almost all industrial process. Since fault occurrences affects the power quality considerably, in this paper is proposed a new fault location method applied to transmission lines constituted of any configuration, as example double circuit, untransposed sections, and multiple derivations.In order to locate the fault, the method uses voltage and current phasors gathered from terminals with measures, however the method does not need these measures from all terminals.The proposed method is composed of three blocks to locate the fault, which are: Algorithm’s Main Control, Grid Scanning Process, and Objective Function’s Minimization Process.A large number of simulations were conducted and the results show the accuracy and efficiency of the method, even in cases of high impedance faults. |
| |
| Keywords: | Fault location Transmission lines Optimization |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
