| 10Ni5CrMoV钢二次焊接热循环局部脆化研究 |
| |
| 引用本文： | 张宝伟,魏金山,张田宏. 10Ni5CrMoV钢二次焊接热循环局部脆化研究[J]. 材料开发与应用, 2004, 19(3): 25-28,32 |
| |
| 作者姓名： | 张宝伟 魏金山 张田宏 |
| |
| 作者单位： | 洛阳船舶材料研究所,河南,洛阳,471039 |
| |
| 摘 要： | 采用模拟焊接热循环的方法,研究了二次热循环对10Ni5CrMoV钢焊接热影响区的组织和性能的影响。结果表明,一次热循环的粗晶区在一定的二次热循环条件下出现了低韧性区,表现为局部脆化现象。引起局部脆化的主要原因是在特定的热循环条件下发生的组织遗传,以及在热影响区中出现的呈网络状分布的粒状贝氏体。
|
| 关 键 词： | 10Ni5CrMoV钢 模拟 局部脆性区 焊接 组织遗传 |
| 文章编号： | 1003-1545(2004)03-0025-05 |
An Investigation on Local Brittle Zone of 10Ni5CrMoV Steel after Twice Thermal Cycle |
| |
| ZHANG Bao-wei,WEI Jin-shan,ZHANG Tian-hong. An Investigation on Local Brittle Zone of 10Ni5CrMoV Steel after Twice Thermal Cycle[J]. Development and Application of Materials, 2004, 19(3): 25-28,32 |
| |
| Authors: | ZHANG Bao-wei WEI Jin-shan ZHANG Tian-hong |
| |
| Abstract: | In this paper, microstructure and properties of 10Ni5CrMoV steel after twice thermal cycle are investigated. The results show that local brittle zone is formed after twice thermal cycle.It is suggested that microstructure inheritance and coarse granular bainite existing in HAZ are the main causes of forming local brittle zone. |
| |
| Keywords: | 10Ni5CrMoV steel Simulation Local brittle zone Weld Microstructure inheritance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
