Finite element analysis of crack mouth opening displacement compliance in crack length evaluation for clamped single edge tension specimens

In the unloading compliance method developed for clamped single edge tension (SE(T)) specimens, six crack mouth opening displacement (CMOD)‐based compliance equations (i.e. a/W = f(BCE′)) were proposed for the crack length evaluation without clearly clarifying the corresponding predictive accuracies. In addition, the effective elastic modulus (E_e) that reflects the actual state of stress should also be introduced in the crack length evaluation for SE(T) specimens, because the actual state of stress in the remaining ligament of the test specimen is neither plane stress (E) nor plane strain (E′). In this study, two‐dimensional (2D) plane strain and three‐dimensional (3D) finite element analyses (FEAs) are carried out to investigate predictive accuracies of the six compliance equations. In both 2D and 3D FEA, specimens with a wide range of crack lengths and geometric configurations are included. For a given specimen, the value of E_e that presents the equivalent stress state in the remaining ligament is calculated on the basis of 3D FEA data. A set of formulae for the clamped SE(T) specimen is proposed that allows to evaluate E_e from the corresponding CMOD compliance. This approach is verified using numerical data. The observations of the numerical verification suggest that the use of E_e instead of E or E′ in CMOD‐based compliance equations markedly improves the accuracy of the predicted crack length for clamped SE(T) specimens.